Sledding Fun

Here's a cute card using the Freezin' Fun Bundle!  The dies include a cute hill and some fun trees!! The "raccoon" has been cut with a full layer of Foam Adhesive Sheet! I like the effect!  Give it a try!!

Measurements:  

• Seaside Spray: 1/2 sheet
• Snowflake Splendor DSP (N): 4" x 5 1/4"  
• Whisper White: 2 pcs - 3 1/4" x 4 1/2", 2 1/4" square, scraps                                                                                                       

To Make This Card:

• Attach DSP to folded Seaside Spray card.
• Cut 2 white layers from largest stitched scallop rectangle die. Set one aside, and cut a "hill", near the bottom, from the other.
• Stamp & cut one each of the trees.  Color with Shaded Spruce Blends. 
• Stamp the "raccoon" on the white square.  Color as shown. Attach to a 2 1/4" square of Foam Adhesive Sheet.  Cut out with die
• Assemble scene on scallop rectangles, lining up scallops, and tucking larger tree underneath.
• Finish with scattered Adhesive Snowflake Sequins and attach to card with Dimensionals.

Product List

Freezin' Fun Bundle (English)

[155176]

$46.75

Snowflake Splendor Designer Series Paper

[153512]

$11.50

Stitched So Sweetly Dies

[151690]

$32.00

Tuxedo Black Memento Ink Pad

[132708]

$6.00

Shaded Spruce Stampin' Blends Combo Pack

[154903]

$9.00

Real Red Stampin' Blends Combo Pack

[154899]

$9.00

Smoky Slate Stampin' Blends Combo Pack

[154904]

$9.00

Bronze & Ivory Stampin' Blends Combo Pack

[154922]

$9.00

Foam Adhesive Sheets

[152815]

$8.00

Stampin' Dimensionals

[104430]

$4.00

Adhesive-Backed Snowflakes

[153545]

$6.00

Snow Wonder "Z" Fold

This darling snowman is from an awesome set called Snow Wonder, and was a gift from a new friend, and stamper, from California!  Thanks, again, Christi!!  I combined it with a plaid from the Plaid Tidings DSP and rich Cherry Cobbler cardstock.

Measurements:  

• Cherry Cobbler: 1/2 sheet
• Whisper White: 2 pcs - 3 1/4" x 4 1/2"
• Plaid Tidings DSP (N): 2" x 5 1/4"                                                                                                    

To Make This Card:

• Fold Cherry Cobbler card in half, and then, again, back on itself, creating a "Z".  Crease well. Attach DSP to front "flap".
• Cut 2 large, stitched, scallop rectangles from Whisper White.
• Stamp "snowman" in Memento Black ink onto one rectangle.  Color with Blends as shown. Attach HALF to card front.
• Randomly stamp some Balmy Blue "snowflakes" in the corners of the other white piece. Attach to inside of card, underneath other rectangle, so it is hidden.
• Finish with some white Adhesive-Backed Snowflakes, a little Wink of Stella, and a Cherry Cobbler knot.

Product List

Snow Wonder Cling Stamp Set

[153344]

$22.00

Plaid Tidings 6" X 6" (15.2 X 15.2 Cm) Designer Series Paper

[153527]

$11.50

Cherry Cobbler 8-1/2" X 11" Cardstock

[119685]

$8.75

Balmy Blue Classic Stampin' Pad

[147105]

$7.50

Tuxedo Black Memento Ink Pad

[132708]

$6.00

Stitched So Sweetly Dies

[151690]

$32.00

Cherry Cobbler Stampin' Blends Combo Pack

[154880]

$9.00

Shaded Spruce Stampin' Blends Combo Pack

[154903]

$9.00

Basic Black Stampin' Blends Combo Pack

[154843]

$9.00

Stampin' Blends Color Lifter

[144608]

$4.50

Adhesive-Backed Snowflakes

[153545]

$6.00

Poinsettia Thank You

Love this Poinsettia Thank You card that I tweeked from another awesome stamper online!  These are MY colors, and I LOVE the Plush Poinsettia paper.

Measurements:  

• Just Jade: 1/2 sheet cut LENGTHWISE, 2" x 5 1/4", 1 1/4" x 2 1/2"
• Pool Party: 1 3/4" x 5 1/4"
• Whisper White: 1 1/4" x 2 1/2"
• Snowflake Splendor DSP (N): 4" x 5 1/4"
• Plush Poinsettia (N): 1 poinsettia
• Silver Foil: scrap

To Make This Card 

• Attach DSP to folded Just Jade card.
• Run Pool Party strip through Winter Snow Embossing Folder.  Attach to Just Jade strip, and then attach to card front.
• Cut out one poinsettia from the Plush Poinsettia Specialty DSP using the coordinating die from the Poinsettia Dies.
• Cut "center" from scrap of Silver Foil. Attach to center with Mini Glue Dot.
• Stamp "thank you" in Just Jade onto scrap of white.  Cut out with die from Tasteful Labels Dies.  Mount onto Just Jade scrap, and fussy cut around label using Paper Snips, creating Just Jade layer.
• Wrap ribbon around card and tie in a bow. Attach label to card over ribbon with Dimensionals.
• Attach Die Cut Poinsettia above sentiment with Mini Glue Dot.
• Finish with scattered Coastal Cabana Rhinestones from the Holiday Rhinestones.

Product List

Snowflake Wishes Photopolymer Stamp Set

[153444]

$26.00

Poinsettia Dies

[153522]

$36.00

Snowflake Splendor Designer Series Paper

[153512]

$11.50

Plush Poinsettia Specialty Paper

[153486]

$11.00

Just Jade 8-1/2" X 11" Cardstock

[153079]

$8.75

Pool Party 8-1/2" X 11" Cardstock

[122924]

$8.75

Whisper White 8-1/2" X 11" Cardstock

[100730]

$9.75

Just Jade Classic Stampin' Pad

[153115]

$7.50

Winter Snow Embossing Folder

[153577]

$7.50

Pool Party 3/8" (1 Cm) Sheer Ribbon

[152462]

$6.00

Holiday Rhinestone Basic Jewels

[150457]

$6.00

Stampin' Dimensionals

[104430]

$4.00

Side Pull Out Card - Square

It's Fun Fold Friday, so here is another version on the Side Pull Out Card with a square shape using the Snowflake Wishes Bundle. These are really fun, and easy, to make.

Measurements:  

• Purple Posey: 1/2 sheet, 3 ¼” square, 1” x 3 ¾” strip
• Highland Heather: 4” x 5 ¼”
• Whisper White: 5 1/4" x 8", ¾” x 3 ¼”, scrap
• Snowflake Splendor DSP (N): 2 5/8” square, 1 7/8” x 5 ¼”
• Silver Foil: scrap
• Balmy Blue Glimmer (N): scrap                                                                                                                                                                

To Make This Card 

• Fold Purple Posey card base in half. Attach Highland Heather quarter to front along outside edges only.
• Cut largest scallop square through both layers on front of card.  Discard Highland Heather piece, and set Purple Posey piece aside to use later. 
• Run entire front through Winter Snow EF.  It’s a little tight, so you may to adjust your “sandwich”
• Fold Whisper White card in half, and then again in half, back on itself, creating a "Z" fold. Crease well. Flip over so the "Z" is on the right, and adhere "base" to inside of Purple Posey card. Attach DSP strip to inside narrow panel.
• Close card.  Place adhesive on right half of Highland Heather scallop square. and adhere to front "z" that is inside while card is closed, lining up scallops. Attach square of DSP.
• Stamp “snowflake” in Balmy Blue onto scrap of Whisper White.  Cut out with die.  Cut medium “snowflake” in Balmy Blue Glimmer paper, and small “snowflake” in Silver Foil.  Layer all together with Dimensionals. Attach to square.
• Stamp sentiment in stamped Highland Heather onto Whisper White strip.. Punch both ends of Purple Posey strip with Lovely Labels Pick a Punch.  Mount together and attach to card.
• Finish with Blue gems in center of “snowflake” and ends of “label”.

Product List

Snowflake Wishes Bundle (English)

[155172]

$55.75

Snowflake Splendor Designer Series Paper

[153512]

$11.50

Highland Heather 8-1/2" X 11" Cardstock

[146986]

$8.75

Purple Posy 8-1/2" X 11" Cardstock

[150881]

$8.75

Whisper White 8-1/2" X 11" Cardstock

[100730]

$9.75

Balmy Blue Glimmer Paper

[153513]

$5.00

Silver Foil Sheets

[132178]

$5.00

Highland Heather Classic Stampin' Pad

[147103]

$7.50

Balmy Blue Classic Stampin' Pad

[147105]

$7.50

Layering Squares Dies

[141708]

$35.00

Lovely Labels Pick A Punch

[152883]

$23.00

Blue Adhesive-Backed Gems

[153547]

$8.00

Stampin' Dimensionals

[104430]

$4.00

Bone Folder

[102300]

$7.00