Becky's Stampin' Studio: many hearts dies

Showing posts with label many hearts dies. Show all posts

Thursday, April 22, 2021

Detail Heart Corner Angle Fold Card

After I made the Blushing Bride Heart Card, I grabbed a few remaining die cuts and Specialty Papers that were around me and designed this card! This also uses the Many Hearts Dies, the Love You Always Specialty Paper and Foil Paper, and the new Pearlescent Paper. Also added a Die Cut from the Always Dies.

Measurements:

Sahara Sand: 1/2 Sheet
Very Vanilla: 2 pcs - 4" x 5 1/4" (1 is template)
Love You Always Specialty DSP (N):3 3/4" x 5", 2 3/4" square
Pearlescent Paper (N): 4" x 5 1/4", 3 3/4" square, 2 3/4" square, scrap
Love You Always Foil (N) - scrap

To Make This Card: (see video)

Begin by making the corner "template". Take one of the Very Vanilla pieces. Measure along the short side 2 3/4" and place a mark. Then, measure along the long side to 3 1/2" and make a mark. Draw a line with a pencil, connecting the 2 marks. Cut along this line. Save the triangle, and discard the rest of the piece. Use it for another card.
Fold card base in half. Place "template" along upper left corner of card. Score along "pencil" line with Bone Folder. It should lightly transfer to the back side. Flip card front over and repeat for the back side. Now, carefully fold along score lines, inverting the corner to the inside of card.
Take one of the other Very Vanilla pieces, and lay inside the card, leaving an 1/8" border. Mark the score line and trim this piece. Trim approx 1/8" from the cut edge. Check for fit. Take the small corner you removed, and fit to the upper triangle.
To layer the outside. Repeat with the Pearlescent piece. Using the scored/folded edge as a guide to cut your layer, and then repeating with the DSP layer. Always allowing for an 1/8" border!!
To decorate the front, cut large heart from "scalloped heart" die and Pearlized Paper. Add a layer of DSP cut from the Specialty DSP, and a "detail heart" cut from the Pearlescent Paper. Add to front of card.
Cut "Love" from scrap of Pearlescent Paper, as well as a "shadow" from Sahara Sand Foil. Adhere to front of card.
To decorate the inside, attach the Very Vanilla corner, then layer the Specialty DSP cut from the front layer.
Finish with a Very Vanilla bow.
Some will also place DSP on the upper, inside flap of card. Your choice!!

Product List

Many Hearts Dies

[154308]

$36.00

Always Dies

[154307]

$33.00

Love You Always Specialty Designer Series Paper

[154280]

$15.00

Love You Always Foil Sheets

[154286]

$10.00

Pearlescent Specialty Paper

[154291]

$4.00

Sahara Sand 8-1/2" X 11" Cardstock

[121043]

$8.75

Very Vanilla 8-1/2" X 11" Cardstock

[101650]

$9.75

Pearl Basic Jewels

[144219]

$5.00

Very Vanilla 1/4" (6.4 Mm) Satin Ribbon

[142794]

$6.00

Bone Folder

[102300]

$7.00

Paper Trimmer

[152392]

$25.00

Sunday, April 18, 2021

Pink Heart Corner Angle Fold Card

Saw a sample of this fold done with these dies and DSP and fell in LOVE!! This is a combination of several of those samples!! This could be used for a variety of occasions!!

Measurements:

Blushing Bride: 1/2 Sheet
Basic White: 3 pcs - 4" x 5 1/4"
Love You Always Specialty DSP (N):3 3/4" x 5", 2 3/4" square, 2 1/4" square
Love You Always Foil (N) - Blushing Bride: 3 3/4" square, 2 1/2" square, 2" square, 1" x 5 1/4" strip

To Make This Card: (see video)

Begin by making the corner "template". Take one of the Basic White pieces. Measure along the short side 2 3/4" and place a mark. Then, measure along the long side to 3 1/2" and make a mark. Draw a line with a pencil, connecting the 2 marks. Cut along this line. Save the triangle, and discard the rest of the piece. Use it for another card.
Fold card base in half. Place "template" along upper left corner of card. Score along "pencil" line with Bone Folder. It should lightly transfer to the back side. Flip card front over and repeat for the back side. Now, carefully fold along score lines, inverting the corner to the inside of card.
Take one of the other Basic White pieces. and lay inside the card, leaving an 1/8" border. Mark the score line and trim this piece. Trim approx 1/8" from the cut edge. Check for fit. Take the small corner you removed, and fit to the upper triangle. The inside layering is done!
To layer the outside. Repeat with the Basic White piece. Using the scored/folded edge as a guide to cut your White layer, and then repeating with the DSP layer. Always allowing for an 1/8" border!!
To decorate the front, cut large heart from "scalloped heart" die and Blushing Bride Foil. Add a layer of DSP cut from the Specialty DSP. Add a bow..
To decorate the inside, cut the heart border from the Blushing Bride Foil. Punch the scallop heart with the Scallop Heart Punch, the smooth heart from the Specialty DSP and the coordinating Heart Punch. The final lalyer is from the Many Hearts Dies.
Some will also place DSP on the upper, inside flap of card. Your choice!!

Product List

Many Hearts Dies

[154308]

$36.00

Love You Always Specialty Designer Series Paper

[154280]

$15.00

Love You Always Foil Sheets

[154286]

$10.00

Blushing Bride 8-1/2" X 11" Cardstock

[131198]

$8.75

Basic White 8 1/2" X 11" Cardstock

[159276]

$9.75

Heart Punch Pack

[151292]

$34.00

Silver 3/8" Metallic-Edge Ribbon

[144213]

$7.00

Paper Trimmer

[152392]

$25.00

Bone Folder

[102300]

$7.00

Friday, January 29, 2021

Lots of Heart Window Flip Up

I hope that you love this bundle as much as I do, because I sat down yesterday and created FIVE cards using it!! It can be used for so many occasions!! I LOVE the little curly heart border. (You have to look close in this one!) While I was inspired by another demonstrator, most of this is all mine, down to the Magenta Madness and Black color combination. Bright pink and black are one of my favorite color combinations, especially for Valentine's. Enjoy....and stay tuned! There's more of this one to come!

Measurements:

Basic Black: 1/4 sheet
Magenta Madness: 3 3/4" x 5 1/2", 3 1/2" square, 1" strip
True Color DSP(N): 3 1/4" x 6"
Basic White: 3 1/4" x 5 1/2

To Make This Card

Score the DSP at 1/2" from the top. Crease well. Attach to Basic White piece with a strong adhesive. Attach to Magenta Madness strip.
Lay the DSP out flat and cut the "smooth" heart from the front of the DSP. (Note: There are 2 heart dies in this set! One makes a single, outside cut. The other makes a double cut, creating 2 hearts, one is a very thin "rope" heart and the other is the center! Really unique!) Keep this heart for another project.
Cut the "scalloped heart" from the Magenta Madness square. Insert the "floral detail" piece and cut both out at the same time.
Attach the outside heart around the opening in the DSP, and attach the "floral detail" through the heart and onto the Basic White piece. Note: A good way to attach this is with a piece of sponge and your Multipurpose Glue.
Cut the "rope hearts" from the strip of Magenta Madness. Attach to bottom of card. Trim as necessary.
Finish with a wrap around bow of Magenta Madness ribbon and some pearls in the larger flowers.

Product List