Becky's Stampin' Studio: Wildflower Birthday Lattice Card

Wednesday, May 28, 2025

Wildflower Birthday Lattice Card

Here's another lattice idea, this time using the Wildflower Birthday Die cuts. I also played with a less "bulky" lattice window configuration with the card front. I like how this one turned out much better than the Pretty Peacock one I posted about a week ago! Less bulk, cleaner results! Such a new layout!

Measurements:

Pretty in Pink: 4" x 11"
Bubble Bath: 4 1/4" x 5 1/2" (base); 3 3/4" x 5" (inside)

To Make This Card:

Fold Pretty in Pink piece in half. Die cut rectangle opening approx 1 3/4" from the fold, in the front of the card with the "lattice" die. The die is the full width of the cardstock, You'll end up with a chopped up card front, lattice piece, and a scrap. Keep all pieces
Place 1/8" Tear n Tape along the newly cut, front edge. Attach one long side of the "lattice" piece.
Repeat for the other end as well, using remaining bottom piece (scrap)
At this point, this piece is too long. Measure so card front measures 5 1/4". You'll remove approx.1/4" from the bottom of the folded card, both edges at the same time.
Now, mount onto Bubble Bath Base, and insert smaller Bubble Bath piece on the inside.
Select die cut of your choice for the front.
Slip a Silicone mat inside and, using Multipurpose Glue, adhere die cut over the "lattice" and hopefully securing to both the top and bottom of the card. (Note: the cake that I used did not have a candle at the top, so I cut one from one of the many cupcake die cuts on the sheet of options.)
Finish with a sentiment stamped in Blueberry Bushel ink, and scattered Sparkle Gems. I also added a couple of die cuts to the inside.

Product List